Categories
Things to pay attention to during the drilling process of the air-leg rock drill
Center rotation. During drilling, the air-leg rock drill must keep the drill rotating in the center of the blasthole and control the air intake.
Nov 29th,2024
442 Views
Things to pay attention to during the drilling process of the air-leg rock drill
I. Points to note when drilling
1. One line. The drill, air drill, and air frame must be kept in one line.
2. Center rotation. During drilling, the air-leg rock drill must keep the drill rotating in the center of the blasthole and control the air intake.
3. Stand aside. People should stand behind the air drill so that they can quickly hold the drill when the needle breaks to avoid hurting people.
4. Give water in moderation. Adjust the amount of water according to the hardness of the rock to make it easier to flow out slurry.
II. Things to note when using
1. The air-leg rock drill must be disassembled and cleaned before use.
2. When reinstalling, add lubricating oil and rotate at low pressure (3kg/cm) for 10 minutes to check whether the operation is normal.
3. Before use, the dirt in the air supply pipe and the joints should be blown clean to prevent dirt from entering the machine. At the same time, check whether the screws and operating handles of each part are tight and flexible, and avoid loose parts of the air-leg rock drill to injure people and ensure the normal operation of the machine.
4. Fill the oiler with lubricating oil before starting the machine, and adjust the oil valve.
5. When drilling with an air-leg rock drill, oil should be added to the oiler once every hour, and no oil operation is allowed
3. After use, please note
1. After drilling, the air-leg rock drill should remove the water pipe and operate it gently.
2. Blow away the water droplets in the machine to prevent the internal parts of the drill from rusting.
I hope the above analysis can help you! If you want to know more related knowledge, you can continue to pay attention to the YIkuang official website.
